Home    About DAF    Applications    Products    Warehouses    Specials    Contact Us
Inside Mount Window

Inside Mount Window Film

Inside Mount Window

DAF Sign and Graphic Media

 - Inside Mount Window Perf (Gecko)

 - ROLL UP Banner Film

 - Backlit Film

 - Safeguard Laminating Film

 - Illusion Perforated Window Film

 - Imprint Solvent Ink Jet Print Film

 - Escape Solvent Ink Jet Print Film with Air Egress Adhesive

  

DAF INSIDE MOUNT WINDOW PERF. FILM

DAF Inside Mount Window Perf. Film is a 5.7 mil PVC film with a 60%/40% perf pattern. (60 percent printable area, 40 percent open area pattern) It has a unique low-tack grip adhesive that’s repositionable and easy to remove with little to no residue after it’s removed. Print to the window grip adhesive side, which has an ink-receptive coating, and apply the graphic to the inside of the window with the adhesive and image facing out. The polyester liner ensures a smooth application since it helps prevent the film from tunneling and curling during installation. There are a lot of good reasons to apply graphics to the inside of a window facing out toward the street … Restrictive sign codes, as extra protection from vandalistic passersby and for the ease of a sheltered indoor installation. DAF’s Inside Mount Window Perf Film makes these inside window applications even easier. The film has a unique low-tack grip adhesive that’s repositionable and easy to remove with little to no residue after it’s removed. Once the film is applied it will stick to the glass for up to a year. The 60/40 perforation pattern provides image quality and clarity when viewed from the outside and is see-through from the inside looking out.

DAF’s Inside Mount Window Perf Film is designed only for use with low-solvent and solvent printers and is available in 54″ x 82′ and 27″ x 12′ rolls.

Application Guide

DAF ROLL UP BANNER FILM

DAF’s Roll Up Banner film is an 8 mil, polyester film laminate. It is white on the print side with a satin finish. It has a grey block out back side. The product is economical but it has features of being highly opaque as well as lay flat. It is compatible with solvent, eco-solvent, latex and UV printing.

Application Guide

DAF BACKLIT FILM

DAF’s backlit film is an 8 mil polyester film. It has a satin finish. It is designed for using with lit graphics in light boxes. It is translucent enough to allow light to illuminate the graphic but opaque enough to obscure the light source behind the graphic. It is compatible with solvent, eco-solvent, latex and UV printing.

 

DAF SAFEGUARD

DAF Safeguard is a clear 3.2 mil cold lamination vinyl film. It is available with a standard clear or optically clear pressure sensitive adhesive, and a choice of economy monomeric or compliable polymeric pvc face films.   Apply this clear layer over DAF printed films to extend the life of your vehicle graphics, billboards and other outdoor displays. DAF Safeguard is available in a choice of two finishes (glass and matte) and five widths (30",38",51",54",60").   For protecting your high quality, brilliant graphics,  DAF Safeguard is the clear choice, AT A GREAT VALUE.   Each roll is suspended and individually boxed.

 

DAF ILLUSION

DAF Illusion is a perforated, self adhesive PVC film designed for displaying graphics on the outside without obstructing the view from the inside.  Printing on DAF Illusion will allow you to create beautiful, vivid graphics which can be applied and removed with ease.  DAF  Illusion is the perfect choice for applications on glass windows and doors, vehicle advertisements, billboards and POP displays.   Each roll is suspended and individually boxed.

 

DAF IMPRINT

DAF Imprint is a Calendered PVC Film developed especially for solvent ink jet printers.  It is available in 3.5 mils with either permanent or removable, high opacity grey adhesive.  This high performance film optimizes color saturation, resulting in beautiful, vivid graphics every time.   The opaque adhesive prevents show through.  Each roll is suspended and individually boxed.

 

DAF ESCAPE

DAF Escape is a Calendered, Renolit Face Film with an air egress self adhesive backing for Vehicle Wrap.  It is available in 2.36 mils or 3.15 mils. You can also choose glossy or matte finish with either clear, grey or black adhesive. No matter what type of vehicle displaying your graphics, DAF Escape is the right choice.   This high performance film will ensure your graphics will print beautifully every time.   The air egress adhesive backing helps to eliminate air bubbles so you can achieve a flawless appearance with ease.   Each roll is suspended and individually boxed.